SYNERBOT TI SERIES.

PACKS READY FOR INTEGRATION

This product line defines a set of equipment packages intended for integration with a robot (Kuka, Motoman, Fanuc, ABB ..) in order to provide a robotic arc welding solution.

The SynerBot package will be conditioned for its mechanical and control integration depending on the specific Robot model in which the integration is to be carried out.
The following standard configurations are available:

  • SynerBot 4000 S-PPI. 400 A with dry torch
  • SynerBot 4000 W-PPI. 400 A with water cooled torch
  • SynerBot 5000 W-PPI. 500 A with water cooled torch

If you want to download the brochure, fill in the following information:

CONFIGURATIONS.

The heart of the SynerBot package is an inverter technology welding equipment, the regulation is synergic with a large range of special welding arcs.

Each standard configuration can be revised according to the specific requirements of the integration, the following aspects must be specified:

  • Arcs and special functions expected in power source.
  • Robot. Control and communication system. Communication bus. Cable length.
  • Power cable length.
  • Wire guide system (Marathon pack-reel of 15 kg). Length.
  • Robot model. Mechanical clamping aspects.
  • Welding wire type. Torch setup.

OPTIONS.

Synerbot TI

SynerBot 4000 S-PPI.

400A with dry torch.

Synerbot TI

SynerBot 4000 W-PPI.

400 A with water cooled torch.

Synerbot TI

SynerBot 5000 W-PPI

500 A with water cooled torch.

SYNERBOT 4000 S-PPI.

Welding 1,0 mm. thick steel/stainless steel and aluminum.

  1. Power source: Synergic pulsed 400 A. refrigerated. Pulsed-Bi-Pulse Package
  2. Interface: DeviceNet fieldbus
  3. Power cable: Coaxial, L = 5 mt.
  4. 1.2mm thick steel welding. Thread guide system: Marathon Pack.
  5. Torch: EDR EBOT 40W Power Pin connection (Miller). Special adaptation disk for robot wrist.

SYNERBOT 4000 W-PPI.

Steel, stainless steel, and aluminium welding 1.2 mm. thick.

  1. Power source: Synergic pulsed 400 A. refrigerated. Pulsed-Bi-Pulse package. Bi-Level Package.
  2. Interface: ProfiNet fieldbus
  3. Power cable: Coaxial, L = 5 mt.
  4. Thread guide system: Marathon Pack. Sirga length 10 m. includes cone.
  5. Torch: Refrigerated EDR EBOT 40 W Power Pin connection (Miller).
  6. EDR cleaning station. Pneumatic motor (Optional).

SYNERBOT 5000 W-PPI.

1.2 mm. thick steel/stainless steel and aluminum welding.

  1. Power source: synergic pulsed 500 A. refrigerated. Pulsed-Bi-Pulse package. Bi-Level Package.
  2. Interface: ProfiNet fieldbus
  3. Power cable: Coaxial, L = 5 m
  4. Thread guide system: Marathon Pack. Cord length 10 m including cone.
  5. EDR EBOT 50 W cooled torch with Power Pin connection (Miller).
  6. EDR cleaning station. Pneumatic motor (optional).

WELDING

IS IN OUR DNA.